Linea 2000 Domo DO961T Mode D'emploi page 27

www.domo-elektro.be
23. Do not move the appliance before it has cooled down
completely.
24. Do not put any bread slices into the slots that are too
thick or that are wrapped in tin foil. This can cause
electric shock or fire.
25. Caution: toasting for too long can cause fire.
PARTS
1. 2 slots
2. Breadlift
3. Browning control
4. Stop button
5. Reheat button
6. Defrost button
7. Crumb tray
USE
1. Before you use the appliance for the first time, remove all packaging materials
and clean the outside of the toaster with a damp cloth.
2. Use the toaster for the first time without any bread in it. Press down the breadlift
and put the browning control to the maximum position. This way you will burn
existing dust that has fallen into the toaster during production or transport. During
this first use small smoke and odor development is possible.
3. For toasting bread, plug in the toaster. Choose the desired browning degree en put
the bread in the slot. Press down the breadlift until it clicks. The heating element
is now activated. The bread will be centered automatically for even toasting.
Precise browning positions are hard to recommend, since this depends a lot on a
persons taste.
4. The toasted bread will pop up automatically when the toasting time has passed.
5. The stop button can be used to cancel the toasting at any time.
6. Your toaster also has a defrost button. When you want to toast frozen bread,
press the defrost button. The defrost button will light up. When the bread is
toasted, it will again pop up automatically and the light next to the defrost button
will go out.
7. When you want to reheat bread that has already been toasted, you can use the
1
3
7
27
DO961T
2
4
5
6