JVC KD-X480BHS Manuel D'instructions page 47

Installation/Connection
Installing the unit (in-dash mounting)
Installing the unit (without mounting sleeve)
1 Remove the mounting sleeve and trim plate from the unit.
2 Align the holes in the unit (on both sides) with the
vehicle mounting bracket and secure the unit with screws
(commercially available).
Use only the specified screws. Using wrong screws might damage
the unit.
Hook on the top side
Orientate the trim
plate as illustrated
before fitting.
Bend the appropriate tabs to hold the
sleeve firmly in place.
Removing the unit
Do the required wiring.
(Page 42)
Dashboard of
your car
41
ENGLISH