Ford FPWE1650 Guide De L'utilisateur page 10

Step 1 - Attach Wheels
Rotate and press the wheel axle in to the mating hole until the wheel snaps and locks into position and will not slide off.
Repeat process on the other side of the pressure washer to install the second wheel.
Step 2 - Attach Storage Hook
Slide the accessory holders into place.
Step 3 - Attach High Pressure Hose to Spray Gun
Attach end of the high pressure hose to the inlet located in the bottom front of the pressure washer. Attach the spray gun to
the high pressure hose, unlock the coupler located on the spray gun by sliding it into position "A". Attach the high pressure
hose, then lock the spray gun to the high pressure hose by pushing the coupler to position "B". To confirm the high pressure
hose is locked into the spray gun, pull gently on the hose.
Step 4 - Attach Spray Nozzle
Insert the adjustable spray nozzle into the spray gun. Turn the adjustable nozzle clockwise until it is hand tight and it locks
in place. To confirm that spray nozzle is locked into the spray gun, gently attempt to pull the two components apart. The
components should remained locked together.
ASSEMBLY
B
A
D
10
B
C
A