Specifications
Model # Description
Blenheim
E2053
Plug-In
Blenheim
E2057
Plug-In
Heating Element Specifications: 150 watt / 300 watt / 450 watt, 12" long / 18" long / 23" long, 110
volt, 60 Htz, IP55 cord, ULC approved
Material Specifications: Mild Steel - Din 2394 Quality - ST 34-2 KB
Warranties:
• Towel Warmer Frame: Limited lifetime warranty. Refer to www.icobath.com for full warranty
coverage details.
• Heating Element: 2 years
• Programmable Controller: 2 years
Fixings: Screws, and Allen Key (if needed) are included.
Heating Element Location: Right-hand vertical tube unless specified otherwise.
Care & Maintenance: A periodic wash using warm water and a soft cloth will retain the high quality finish
of your towel warmer for many years to come. ON NO ACCOUNT should any household bleaches,
detergents, abrasive polishes, steel wool or other cleaning agents be used on this item.
Weight
Element
Finish
(lb)
Chrome
46.2
Oil Rubbed
Bronze
46.2
Output
WxH
Size
(BTU)
(mm)
300W
1024
450 x 940
300W
1024
450 x 940
WxH
Metal
(Inches)
Type
23.5" x 50.75" Mild Steel
23.5" x 50.75" Mild Steel
877-757-8930
www.icobath.com