Brentwood Appliances TS-306 Mode D'emploi page 4

Parts:
Indicator Light
Before First Use
IMPORTANT: Please check all packaging material carefully before discarding as
there may be accessory parts contained within the packaging material.
WARNING:
 Before plugging in, check to see that the electric circuit is not overloaded with
other appliances. This unit should always be operated on a separate 120Volt
AC outlet.
 Be certain that your unit is resting on a leveled flat countertop. Avoid using pans
that are unstable and easily tipped.
Using Your Electric Burner:
WARNING: Avoid contact with moving parts.
1. Place pan on heating element.
2. Turn control knob from the "OFF" position to the desired temperature position
between LOW - HIGH
3. The heating element will energize and heating will begin immediately.
CAUTION: The whole burner, except the control knob, will become hot. Do not
touch while in use.
4. When cooking is complete, turn control knob back to "OFF" position.
TIP: If the burner is not to be in use for a long period of time, it is highly
recommended to unplug the unit from the outlet. This prevents any accidental
burns or injury.
Cleaning Your Electric Burner or Hot Plate:
WARNING: Always unplug the product and allow it to cool before cleaning or
storing it.
NOTICE: Never immerse burner, plug or cord in water or any other liquid.
 Use a damp towel or sponge to clean the surface of burner, the burner ring, the
drip pan and the base.
 For easy cleaning of the drip pan, the heating element is designed so that one
end can be lifted up. Wipe the drip pan a damp towel or sponge. Do not attempt
to remove the entire heating element.
 Never use harsh abrasives or steel wool pads on any part of the unit.
Control Knob
4
Heating Element