Publicité
27
15 amp.
13,3 V
PIN 10
ON
12,8 V
12,3 V
OFF
ATTENTION
The Voltage Control Module (VCM) in this kit is designed to be self switching at a pre-set voltage input.
With the engine started, the switched output (e.g. caravan fridge or alternative), pin 10, will switch on
at a preset figure of 13,4 volts.
When the engine is switched off, the switched output will remain live until the vehicle battery voltage
drops to a preset figure of approx 12,7 volts.
NOTE: The cut-off voltage depends on the condition of the vehicle battery, power consumption of the
fridge etc. In all cases, the cut-off figure is preset so the vehicle engine can be started at any time.
/
87250924/28.03.2018
11/13
© ConWys AG / Buzibachstrasse 31a / CH-6023 Rothenburg / FON: +41 41 317 20 50 / FAX: +41 41 317 20 51 / www.conwys.ch / mail to: info@conwys.ch
Publicité
