Publicité
Les langues disponibles
Les langues disponibles
of the power tool in unexpected situations.
•
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellry or long hair can be caught in moving parts.
•
If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used. Use of dust collection can reduce dust-related
hazards.
4) Power tool use and care
•
Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
•
Do not use the power tool if the switch does not turn it on and off. Any power tool that can-
not be controlled with the switch is dangerous and must be repaired.
•
Disconnect the plug from the power source and/or the battery pack from the power tool be-
fore making any adjustments, changing accessories, or storing power tools. Such preven-
tive safety measures reduce the risk of starting the power tool accidentally.
•
Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool. Power tools are dangerous in
the hands of untrained users.
•
Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts
and any other condition that may affect the power tool's operation. If damaged, have the
power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
•
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
•
Use the power tool, accessories and tool bits etc. in accordance with these instructions, tak-
ing into account the working conditions and the work to be performed. Use of the power tool
for operations different from those intended could result in a hazardous situation.
5) Battery tool use and care
•
Recharge only with the charger specified by the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire when used with another battery pack.
•
Use power tools only with specifically designated battery packs. Use of any other battery
packs may create a risk of injury and fire.
•
When the battery pack is not in use, keep it away from other metal objects such as paper
clips, coins, keys, nails, screws or any other small metal objects that may make a connec-
tion from one terminal to another. Shorting the battery terminals together may cause burns
or a fire.
•
Under harsh conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid comes into contact with eyes, please also seek
medical help. Liquid ejected from the battery may cause irritation or burns.
6) Service
•
Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
SPECIFIC SAFETY INSTRUCTIONS FOR BATTERY SCREWDRIVER
•
Hold the power tool by the insulated gripping surfaces when performing an operation where
the fastener may make contact with hidden wiring. Fasteners making contact with a "live"
wire may make exposed metal parts of the power tool "live" and could give the operator an
electric shock.
•
Protect the battery charger from rain and moisture. The penetration of water into a battery
20
Publicité
