Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
STEP 1
Plug
Back Assembly
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1 Remove pre-in stalled plugs on back assembly .
STEP 2 Attach Headrest (1) to rear top of back assembly using two Screws (2) . FULLY TIGHTEN ALL SCREWS (2) USING
ALLEN WRENCH (3).
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
HR33B / HR31W / HR36S
HEADREST
ASSEMBLY INSTRUCTIONS
STEP 2
2
Back Assembly
1
PART
1. Headrest . . . . . . . . . . . . . . . . . . . . . . . . . . .1
2. Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
3. Allen Wrench (packed w/ chair hardware) . .1
© Office Star Products July 2017
QTY
Publicité
Sommaire des Matières pour Pro-Line II HR33B
- Page 1 HR33B / HR31W / HR36S HEADREST ASSEMBLY INSTRUCTIONS STEP 1 STEP 2 Plug Back Assembly Back Assembly PART 1. Headrest . . . . . . . . . . . . . . . . . . . . . . . . . . .1 2.
- Page 2 HR33B / HR31W / HR36S APPUIE-TÊTE INSTRUCTIONS DE MONTAGE ÉTAPE 1 ÉTAPE 2 bouchon dossier dossier PART 1. Appuie-tête . . . . . . . . . . . . . . . . . . . . . . . . .1 2.