Télécharger Imprimer la page

NUTRIBULLET Pro 900 Mode D'emploi page 7

Publicité

Les langues disponibles

Les langues disponibles

NutriBullet
assembly & use.
PLEASE KEEP
THESE IMPORTANT
SAFEGUARDS IN
MIND WHEN USING
THE APPLIANCE:
Make sure the base is
plugged in for use.
• Handle the easy-twist extractor
blade assembly with care as
the blades are sharp.
• Never run the appliance while
empty.
• Appliance accessories are not
intended to be used in the
microwave as it may damage
the accessories.
Never
leave the appliance
unattended while in use.
Never blend hot ingredients
when using any sealed
NutriBullet
cups.
®
Heated ingredients can
pressurize sealed containers
when agitated and violently
expel hot contents upon
opening. Always start the
blending process with room
temperature or refrigerated
ingredients and liquids
(21°C/70°F or cooler).
12
cup
®
1
Review all warning and
caution statements in the
Important Safeguards
section (pg. 2-7) before
proceeding to Step 2.
2
Place the motor base on
a clean, dry, level surface
such as a counter or table.
3
Add ingredients to
the NutriBullet
cup.
®
NOTE:
Do not overfill! To avoid
leakage, do not add ingredients
beyond the MAX line.
4
Twist the easy-twist
extractor blade onto the
cup until tightly sealed.
5
Plug the power cord into
an electrical outlet.
6
Turn the cup upside down
and place it onto the motor
base, gently turning the cup
clockwise to lock into the
motor base. This will activate
the extraction cycle.
7
The extraction cycle will
automatically run for 1
minute. If you'd like to stop
extracting before the cycle is
over, proceed to step 8.
8
Unlock the assembly by
gently twisting the cup
counterclockwise. You will
hear a click. Enjoy!
NOTE:
Blending should not require
longer than one minute to yield
smooth and creamy results.
CAUTION
Do not remove the easy-twist
extractor blade from the
NutriBullet
cup until blending
®
has completely ceased. Do not
use the easy-twist extractor blade
as a storage lid for your cup.
Some foods may contain active
ingredients or release gases that
will expand if left in a sealed
container, resulting in excessive
pressure buildup that can pose
a risk of injury. When storing
contents in the cup, use plastic
wrap or foil to seal your container.
Always point contents away from
your body when unsealing.
13

Publicité

loading

Ce manuel est également adapté pour:

Pro 1000