Samsung RF263BE Serie Mode D'emploi page 11

2.
Disconnect two connectors (
door. To remove the water coupler from the
hinge, twist and pull it from the hinge. Remove
the water line ( 3 ) while pressing the marked
part ( 4 ) of the water line coupler.
If a red clip is on the coupler, it must be
removed before removing the tube.
CAUTION
2
Red Clip
(1/4")
3
4
3.
Pull and remove the hinge lever (
the ground screw ( 6 ) attached to the upper
left door hinges with a philips screwdriver (+).
Remove the upper left and right door hinges
( 7 ).
5
7
4.
Lift the door straight up to remove.
5.
Remove the screw (
lower left and right door hinges with a philips
screwdriver (+). Remove the 2 hex head bolts
( 9 ) attached to the lower left and right door
hinges with an allen wrench (3/16"). Remove
the lower left and right door hinges ( 10 ).
DA68-02601A(EN+FR+ES)-0.2.indb 8
2 ) on the left side
5 ) . Remove
6
8 ) attached to the
10
8
9
Allen wrench
REATTACHING THE
REFRIGERATOR DOORS
To reattach the fridge doors after you have moved
the fridge to its final location, assemble the parts in
reverse order.
1.
The Water Line must be fully Inserted to the
center of transparent coupler to prevent water
leakage from the dispenser.
2.
Insert the clip in the top plate and check that it
By placing the 3 screws again ensure that the wires
CAUTION
are in not to damage the harness.
DISASSEMBLE THE FLEX DOOR
1.
Take out the upper drawer by lifting it up.
2.
Take out the lower basket (
basket up from the rail system.
3.
Press the fixing hook of rail system.
1 ) by lifting the
1
11_ setting up
2012.3.31 9:49:38 AM