Display Messages
Displayed Message
ADD GROUND COFFEE
CLOSE DOOR!
DESCALE!
(alternating with)
MEDIUM CUP Standard
taste
FILL BEANS
CONTAINER!
FILL TANK!
GENERAL ALARM
GROUND TOO FINE
ADJUST MILL
INSERT WATER SPOUT
Press OK
GROUND TOO FINE
ADJUST MILL
(alternating with)
Press OK
(and then)
FILL TANK!
INSERT BREWING
UNIT
INSERT MILK
CONTAINER!
INSERT GROUNDS
CONTAINER
Possible Cause
The "ground coffee" function has been selected
without placing any ground coffee in the funnel.
The service door is open.
Indicates that descaling is needed.
The coffee beans have run out.
The water tank is empty or incorrectly positioned.
The inside of the coffee system is very dirty.
The ground is too fine so the coffee runs off too
slowly.
The water tank was removed during coffee runoff.
There is air in the water line.
The brewing unit has not been replaced after
cleaning.
The milk container is missing or incorrectly
positioned.
After cleaning, the grounds container has not been
replaced.
Remedy
Slide the coffee system out. Using the funnel, add
ground coffee.
Close the service door.
The descaling program must be run as soon as
possible. Follow the instructions in "Descaling" in
the "Settings" section.
Fill the beans container.
Fill the tank with water and/or insert it correctly,
pushing it in as far as it will go.
Clean the inside of the coffee system thoroughly,
as described in "Cleaning the Inside" in the
"General Cleaning" section. If the message is still
displayed after cleaning, contact a service center.
Turn the grinding adjustment knob one click toward
number 7.
Replace the tank and press OK. The display will
show "HOT WATER" and will dispense hot water.
Then it is ready for use.
Insert the brewing unit as described in the
"Cleaning the Brewing Unit" section.
Insert the milk container correctly, pushing it in as
far as it will go.
Open the service door and insert the grounds
container.
17