Publicité
Liens rapides
CH1701LGL-03
1
2
CASTER
5-STAR BASE
5
1
Part #
Part #
H188313
H188229
2
1
3
5
6
8
max weight
275lbs
BACK & SEAT CUSHION
3
4
GAS LIFT
W/SEAT PLATE
1
Part #
Part #
H188230
S188235
3
REPEAT FOR OPPOSITE ARMREST
REPETIR PARA ARMENDO OPUESTO
REPETE POUR ACCOUDOIR OPPOSE
4
5
ARMREST
1 set
1 set
Part #
H188308
Lot Code:
2
4
5
7
7
6
SCREW
PLASTIC CAP
4
4
5/16"x1-5/8"L
Part #
Part #
H189590
H189591
A188353
An assistant is required.
Es necesario un ayudante.
Un assistant est nécessaire.
4
REPEAT FOR OPPOSITE ARMREST
REPETIR PARA ARMENDO OPUESTO
REPETE POUR ACCOUDOIR OPPOSE
8
ALLEN WRENCH, 5mm
1
Part #
H122485
Publicité
Manuels Connexes pour Bush Business Furniture CH1701LGL-03
Sommaire des Matières pour Bush Business Furniture CH1701LGL-03
- Page 1 CH1701LGL-03 A188353 An assistant is required. Es necesario un ayudante. Un assistant est nécessaire. REPEAT FOR OPPOSITE ARMREST REPEAT FOR OPPOSITE ARMREST REPETIR PARA ARMENDO OPUESTO REPETIR PARA ARMENDO OPUESTO REPETE POUR ACCOUDOIR OPPOSE REPETE POUR ACCOUDOIR OPPOSE max weight 275lbs BACK &...
- Page 2 CH1701LGL-03 OPERATING INSTRUCTIONS A188353 To raise the seat height, stand up from the chair while lifting the lever (A) under the right side of the seat.To lower the seat height, lift the lever (A) while sitting in the chair. Para ajustar la altura del asiento: Para elevar la altura del asiento, levántese...
- Page 3 CH1701LGL-03 OPERATING INSTRUCTIONS A188353 Tilt Tension Knob (B) under the seat adjusts the amount of force needed to recline the chair. To increase tension,turn knob (B) clockwise.To reduce tension,turn knob (B) counterclockwise. If seat cushion is loose, please tighten the Knob (B).
- Page 4 CHAIR WARNING DO NOT STAND ON THIS CHAIR. DO NOT USE THIS CHAIR AS A STEP LADDER. FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY! - Use this product only for seating one person at a time. - This chair has been tested and approved for users weighing 275lbs (125kg).
- Page 6 THIS PAGE INTENTIONALLY LEFT BLANK...
- Page 7 THIS PAGE INTENTIONALLY LEFT BLANK...