Publicité
4. Commissioning
Take the device out of the package and remove all the packaging materi-
al. Check the scope of delivery for completeness. Charge the battery fully
using the charger provided. Insert the desired screwer or drill bit into the
quick release chuck and fix it.
Insert the charged battery at the bottom of the device into the port and
make sure that it locks into place.
When using the device, keep one hand on the handle and the other
hand at the bottom of the battery, so as to be better able to control the
rotary action. Set the desired torque for your work using the rotating
ring. Finally, set the desired direction of rotation. The device is now
ready for use.
Note: If the speed reduces too much, then always reduce the load or stop
using the device to avoid damage.
5. Usage - Driller mode
Rotate the torque adjustment ring to the drill symbol. Alternatively, you
can select the hammer symbol, If you want to use the impact function.
5.1. Usage - Impact drill function
The hammer icon activates the impact drill function. The device is also
suitable, for example, for drilling holes in concrete ceilings or concrete
walls.
33
English
Publicité
