Fanelite TF-37R Mode D'emploi page 14

1. Assemble the rear base and the front base (Fig 1 and 2).
2. Place the column correctly onto the base and assemble the base and column by tightening
the 4 screws provided. Be sure to pass the power cord to the center of the base.
3. Place the power cord in its place and secure it with the small hook provided for this
purpose (hook towards the back of the tower). Make sure that the power cord does not touch
the oscillating mechanism under the tower so as not to damage the power cord and prevent
oscillation (Fig 3 and 4).
5. OPERATING INSTRUCTIONS
WARNING : Before using your appliance, carefully read the safety instructions in this
manual.
Plug in the power cord.
Insert two batteries AAA into the remote control (see section REPLACING THE BATTERIES
for more information).
Using the control panel or the remote control :
Power ON/OFF
Press the ON/OFF button to turn on or turn off your fan.
Speed setting
By default the fan starts at low speed. Press the SPEED button to adjust the speed :
L. Low speed M. Medium speed H. High speed
14