Publicité
Les langues disponibles
Les langues disponibles
9, Insert flexible rod I into one side of the setof flexible
rods H. Carefully bendthe assembly to insert the free
end of flexible rod I into the other set of flexible rods H.
CAUTION: R odsare under stress at
thistime, Safety glassesshouldbe
worn duringthisstep, until the
next step is completed,
10. Removefabric from carton and unfold, Stand at the
rear end of the cab frame, facing the front. With fabric
in hand, and making sure the reflective fabric is onthe
outside of the cab frame, slide the insidefabric pocket
overflexible rod assemblyH/Hi!/H/H.
NOTE: B e sure rod assembly H!H/I/HIll is fully inserted
into the top of the inside fabric pocket.
Fabric pocket
11. Pull the cab material down and back towards the arch
assembly,D/C/D.Fastenhook-and-loopstraps on both
sides of the D/C/Dassembly.Slideelastic loopsover
the rear corner of bar A on both sides. Fastenhook-
and-loopstraps aroundoil bars at variouslocations.
(For your convenienceyou may want to wait until the
cab is mounted on your snow 1hrowerto finish
fastening these straps.)
Publicité
