Publicité
Les langues disponibles
Les langues disponibles
POWER
TO TURN ON: Press the power key for one second until the LED flashes green.
TO TURN OFF: Press and hold the power key for three seconds until the LED flashes red.
NOTE: To conserve battery, your Brydge will enter sleep mode after 20 minutes of non-use. Press any key to turn back
on. Your Brydge will enter sleep mode when both devices are closed like a laptop.
PAIR
TO PAIR: Press and hold the Bluetooth key for three seconds until the LED flashes blue.
On your iPad, under Settings > Bluetooth select Brydge Pro+.
When successfully paired, the blue LED will turn off and your keyboard and trackpad will be active.
CUSTOMIZE THE TRACKPAD
To further enhance the trackpad experience on your iPad, we suggest the following settings:
1. ENABLE ASSISTIVETOUCH
GO TO: Settings > Accessibility > Touch >
AssistiveTouch and toggle it on.
AssistiveTouch
NOTE: All gestures are supported except pinch-to-zoom.
For up-to-date settings and video instructions, visit: www.brydge.com/pro-plus-instructions
INSERT/REMOVE
IMPORTANT
Remove non-Brydge screen protectors before attaching your Brydge keyboard. This will ensure a perfect fit and
eliminate unnecessary pressure to your screen when inserted into the hinges.
TO INSERT: Place your Brydge on a flat surface and set the hinges upright to 90 degrees.
Insert your iPad into the hinges with the home button on the right, one side at a time.
If your iPad is loose, remove it and gently squeeze the hinges. Repeat this process until your iPad is held firmly.
TO REMOVE: Ensure your Brydge is on a flat surface.
Place your hand towards the back of the keyboard and pull up, one side at a time.
MAGNETIC COVER
Magnetic cover is located in the bottom of the packaging.
CHARGE
TO CHECK BATTERY LIFE: In Today View, go to the BATTERIES section to check battery life. If not available, swipe
left on your Home Screen to show Today View, scroll to the bottom and click edit. Scroll down to Batteries, and click
the green '+' icon to add.
NOTE: If battery life is below 15%, backlit key functionality will be disabled to conserve battery.
TO CHARGE: Insert the charging cable into the keyboard and plug the other end into a power source. A solid red
LED indicates the Brydge is charging.
When the keyboard is fully charged, the red LED will turn off. A full charge can take up to three hours.
KEYBOARD SHORTCUTS
Copy
Command + C
Home Screen
Command + H
Switch Language
Ctrl + Shift + Spacebar (Spacebar allows you to toggle through available languages)
WARRANTY
Thank you for purchasing a Brydge product. This product comes with a 1-year limited hardware warranty on the terms and conditions set out in this
document and at www.brydge.com/warranty. All Brydge warranties are non-transferrable and are only available to the original end-user of the product.
Warranties do not apply to products purchased from online vendors unauthorized to sell Brydge-branded product. If a defect arises during the warranty
period, cease using the product and contact Brydge. To obtain warranty service, visit www.brydge.com/support or call +1 (435) 604-0481. Brydge, at its
sole discretion and option, will (1) repair the product at no charge using new parts or parts that are equivalent to new in performance and reliability, or
(2) replace or exchange the product with a product of equivalent functionality and value. Brydge offers free return shipping on any approved warranty
claims. A shipping label will be provided to you if you are within the United States. If you are outside the United States, Brydge will reimburse your return
shipping to a maximum of US$15.00 after providing a copy of the shipping receipt.
Australia Only: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or
refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Brydge Technologies LLC | 1912 Sidewinder Dr., Suite 104, Park City, UT 84060 USA
2. CONFIGURE SETTINGS
GO TO: Settings > Accessibility > Touch >
AssistiveTouch > Devices (Pointer Devices) >
Brydge Pro+ (Connected Devices) and adjust
the Button shortcuts.
Button 3
Paste
Command + V
Switch App
Command + Tab
HAVE A QUESTION? Visit www.brydge.com/support
App Switcher
Cut
Command + X
Show Dock
Command + Option + D
Settings
3. TURN OFF ASSISTIVETOUCH MENU
GO TO: Settings > Accessibility > Touch >
AssistiveTouch > Always Show Menu (Pointer
Devices) and toggle it off.
Always Show Menu
The AssistiveTouch menu will be hidden when a pointed
device is connected.
Underline
Command + U
Search
Command + Space
On
Pro+
Connected
Italic
Command + I
Undo
Command + Z
Publicité
