Westward 10F635 Mode D'emploi page 3

Westward Operating Instructions and Parts Manual
STEP 1
： ： ： ：
1. Attach the connecting rod to the hopper
assembly by using the M6x35 carriage
bolts and tighten by hand or with a pair
of pliers the M6 wing nuts. Do not over
tighten.
30 Lb. Broadcast Spreader
2. Attach the handle to the connecting rods
using the M6x35 carriage bolt and
tighten by hand or with a pair of pliers
the M6 wing nuts. Do not over tighten.
Attention: The gauge plate should on
the right hand side!
3
10F635