Lindy 32119 Manuel Utilisateur page 2

User Manual
Introduction
Thank you for purchasing the Lindy HDMI 2.1 EDID Emulator. This product has been designed to provide
trouble free, reliable operation. It benefits from both a LINDY 2-year warranty and free lifetime technical
support. To ensure correct use, please read this manual carefully and retain it for future reference.
The Lindy HDMI 2.1 EDID emulator adapter is designed for systems that require EDID signals to be
continuously provided without interruption and help overcome EDID related problems which can occur
when using AV/KVM Extenders, Switches and Splitters.
Package Contents
▪
HDMI 2.1 EDID Emulator
▪
This Manual
Features
▪
Supports EDID Learning and EDID Emulation
▪
Headless connection
▪
Supports resolutions up to 7680x4320@60Hz or 3840x2160@120Hz
▪
Powered via HDMI Source
Installation and Use
The EDID emulator contains pre-set EDID information for many commonly used resolutions and refresh
rates, please refer to the table on the following page.
Cloning procedure
1. Firstly, ensure the display and source devices are turned on.
2. Insert a HDMI cable from the targeted display to the EDID Emulator.
3. Connect the EDID emulator into the HDMI source device.
4. With a small pin click the button on the top of the Emulator to start the cloning process. The LED
on the top of the unit will flash blue for approximately 5 seconds. Once the LED is a solid blue
light the cloning process is complete.
Restore to default EDID
Note: This process does not require a HDMI cable connected to the Emulator or the display
1. Connect the Emulator to the source device.
2. With a small pin click the button on the top of the Emulator. The LED will start to flash blue for
approximately 5 seconds. Once the LED has turned off the Emulator has now been reset to
the pre-set EDID.
English