König Electronic GAMPS3-BLUETHS Mode D'emploi page 3

4. Switch your headset to pairing mode. Push the pairing button and the blue/red
indicator flashes in sequence until the headset pairs with your PS3.
5. Select the headset on the PS3 menu, enter the password: "0000" and confirm.
6. Then go to "settings for audio device" in the settings menu.
7. Go to "input device" and select the headset.
8. Go to "output device" and select "standard device".
9. Select "confirm" and the headset is ready for use.
NOTE: When the headset is successfully paired with your PS3, the blue light indicator
will be burn steadily without the red light indicator flashing.
Test and use the headset:
Your PS3 and headset are now paired and the headset is ready for speaking in on-line
games. To confirm they are operating properly:
Go to "settings for audio device" in the settings menu:
1. Watch the indicator bar and speak into the headset, when you see movement in the
bar the headset is installed properly.
2. You can adjust the volume to your own desire.
NOTE: After pairing the PS3 and the headset once, you do not have to repeat it again
when you want to use it a next time.
Change to use the other ear:
You can wear the headset on the left or right ear. To change the headset to another
ear:
1. Lift the top of the ear hook and off the upper hinge pin.
2. Pull the hinge pin away and remove it from the headset.
3. Change the direction
4. Fix the ear hook on the headset again.
Pull Earhook Up
Hinge Pin
3