Operating Your Appliance
Internal Light
This refrigerator is equipped with side internal lights that can be set to Cloud White, Deep
Blue or Amber. Because the unit comes with a glass door, the inside will be seen whether
the door is open or closed.
You can choose to display each color of light in two different modes: Display Mode and
Automatic Mode.
Display Mode
The internal lights will stay constantly illuminated whether the door is open or closed.
Display Mode is a custom/user-defined function, not a regular day-to-day function.
Automatic Mode
The internal lights will illuminate each time the door is opened and fade off once the door
is closed. This feature is triggered by a sensor located on the front vent, this sensor allows
the refrigerator to recognize when the door is open or closed.
*The default mode is Automatic Mode. To change between modes, press and hold the
Interior Lights button for 3 seconds.
Door open alarm
After 3 minutes of the door being open an alarm will sound and the display will flash with
.
00
Sabbath mode
Sabbath mode disables system responses to user-initiated activities and all external
functions, including lighting, display and audible alarms. The unit will still maintain
internal temperatures and set points.
To enable or disable Sabbath mode, Press the Power Button and simultaneously press
the Increase Temperature Button twice. The interior light and control display will go dark
until the user disables Sabbath mode.
Note: Although the display will not be visible, the temperature settings will remain active
and preserve the internal temperature. Sabbath mode will remain active until it is
disabled by the user.
Demonstration mode
In this mode, the compressor and fans never turn on but all other functions remain
enabled.
When in Demonstration Mode, the "R" indicator light will slowly blink indicating it is in
Demonstration Mode .
To enable or disable Demonstration mode, hold Power Button and tap Decrease
Temperature Button twice.
17