Publicité
Les langues disponibles
Les langues disponibles
Operation
|
Specification
1. Place the record on the turntable. (If needed,
record speed (33 or 45 rpm).
Speeds
33/3 and 45 rpm
. Move the cueing lever to position
.
. Slowly move the tonearm to a position just
above the starting point of the record groves.
The turntable will start rotating.
. Speed Adjustment:
Check the stroboscope.
Unless the stroboscope seems
to stop, turn
the fine speed to adjust the rotating speed of
Speed control range
Speed change
Wow and flutter
Signal to noise ratio
Turntable platter-diameter
Turntable platter-weight
Tonearm
Individual! controls: + 4%
Electronic type
0.08% (DIN)
Better than 60 dB
30.5 cm
1 kg (2 Ibs. 4 ozs.)
Static-balance type
turntable accurately.
Tracking error
£15
Tracking force range
O—3g
6. Move the cueing lever to position
2%. This
Cartridge
Magnetic stereo cartridge
will gently lower the tonearm onto the record
Stylus
Diamond, 0.6 mil
ane Playesck will start.
Frequency response
20... 20000 Hz
7. When playback is finished, the tonearm will
Overhang
15mm
return to the tonearm
rest and the power is
switched off automatically.
. If you desire to stop the playback, press the
(STOP/AUTOMATIC) button.
Channel separation
Mains voltage
Power consumption
Dimensions (W x H xD)
Weight
Better than 25 dB
220... 230 V AC, 50/60 Hz
12W
Approx. 440 x 130 x 360 mm
Approx. 7 kg
Note:
1. Do not turn the turntable shaft counterclockwise.
2. For turntable maintenance, please consult your authorized dealer.
Publicité
