Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
These instructions do not apply to all vehicles. They are only meant as a general
guide due to the number of different makes & models. For vehicle specific
questions contact your vehicle's manufacturer.
Parking sensor installation
There are several ways to mount the camera on the back of your car. But the most
convenient is to mount it near the license plate of the car. Supplied are two mounting
plates that can be fixed behind the license plate. On these plates the camera can be fixed.
The camera is tiltable, camera angle can be adjusted manually on vertical direction. Make
sure that its field of view and detection are not obstructed.
At some type of cars it is not possible to mount the camera near the license plate. You
may have to find another spot at the back of your car to mount the camera with the
supplied bolts and screws.
1. Remove the rear license plate, and then loosen the license plate bolts/screws.
2. Position the supplied mounting plates behind the license plate bracket. Secure both
license plate bracket and mounting plates with the license plate bracket bolts/screws.
3. Fix the Cameraunit with the supplied bolts and nuts in the mounting plates. Align the
camera left/right and tighten the screws/bolts.
All manuals and user guides at all-guides.com
2
Publicité
