Télécharger Imprimer la page

Garmin NMEA 2000 GPS 17 Serie Instructions D'installation page 4

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 7
There are holes in the under-deck mounting bracket that can be used to secure the under-
deck mount to the mounting surface with screws. Garmin does not recommend attaching
the under-deck mounting bracket to the surface with screws, because of the likelihood that
screws will extend beyond the top of the mounting surface. If you choose to use screws, do
so with extreme care.
3. Place the GPS 17x in the under-deck mounting bracket.
4. Adhere the under-deck mounting bracket to the mounting surface.
5. Connect the NMEA 2000 drop cable to the GPS 17x.
6. Route the cable away from sources of electronic interference, and connect it to your
NMEA 2000 network.
Step 2: Connect the GPS 17x Antenna to Your NMEA 2000
Network
The GPS 17x is packaged with a NMEA 2000 T-connector and a NMEA 2000 drop cable. You
will use these two components to connect the GPS 17x to your existing NMEA 2000 network.
If you do not have an existing NMEA 2000 network, you will need to install a NMEA 2000
network on your boat. For more information on NMEA 2000, visit www.garmin.com.
To connect the GPS 17x to
your existing NMEA 2000
network:
1. Determine an appropriate
location to connect the
GPS 17x to your existing
NMEA 2000 backbone.
2. Disconnect one side of a
NMEA 2000 T-connector
from the backbone nearest
to the location where you
want to connect the GPS 17x
antenna.
If you need to extend the
NMEA 2000 backbone,
connect an appropriate
NMEA 2000 backbone
extension cable (not
included) to the side of the T-
connector you disconnected.
6. Connect an included T-
connector in the NMEA 2000
backbone.
7. Route an included drop cable
from the GPS 17x antenna to the top of the T-connector you added to your NMEA 2000
network.
If the included drop cable is not long enough, you can add a drop cable extension up to
13 ft. (4 m). If more cable is needed, add an extension to your NMEA 2000 backbone, based
on the NMEA 2000 guidelines.
Step 3: Update Your Chartplotter
To ensure compatibility with the GPS 17x, upgrade your Garmin chartplotter with the latest
software. For more information, visit http://www8.garmin.com/support/download.jsp.

NMEA 000
NMEA 000
device
device
(not included)
(not included)
Existing NMEA 000 network
Existing NMEA 000 network
(not included)
(not included)
GPS 17x NMEA 000 Installation Instructions
GPS 17x
GPS 17x
antenna
antenna
NMEA 000
NMEA 000
(not included)
(not included)
Drop cable
Drop cable
(included)
(included)
T-connector
T-connector
(included)
(included)
device
device

Publicité

loading