Timer - vivandio VI-KI1-DB Notice D'utilisation

•
Power management:
The hole cooking hob is equipped by a maximum of power. When the booster function is
activated, and not to exceed the maximum power, the electronic system orders to reduce
automatically the power level of another heating zone. The display is blinking on [ 9 ] during a few
seconds and then shows the maximum of power allowed :
Heating zone selected
[ P ] is displayed

Timer

The timer is able to be used simultaneous with all 2 heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.
•
Setting and modification of the cooking time :
Example for 16 minutes at power 7 :
Action
Zone selection
Increase power
To select « Timer »
Decrease the time
Increase the time
After a few seconds the control light stops with blinking.
The time is confirmed and the cooking starts until the time reaches [ 00 ].
•
To stop the cooking time:
Example for 13 minutes at power 7 :
Action
Zone selection
To select « Timer »
To stop the « Timer »
If several timers are activated repeat the process.
•
Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound
rings.
To stop the sound and the blinking it is enough to press any key.
•
Egg timer function :
Example for 29 minutes :
Action
Activate the hob
Select« Timer »
Decrease the time
...
Increase the time
After a few seconds the control light stops with blinking.
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings.
To stop the sound and the blinking it is enough to press any key.
The other heating zone:
[ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone
Control panel
Press selection key from the zone
Press key [ + ]
Press simultaneously [ - ] and [ + ]
Press key [ - ]
Press key [ + ]
Control panel
Press selection key from the zone
Press simultaneously [ - ] and [ + ]
Press key [ - ]
Control panel
Press key [ ]
Press simultaneously [ - ] and [ + ]
Press key [ - ]
Press key [ + ]
27
(example: power level 9)
Display
[ 0 ]
[ 1 ] to [ 9 ]
Timer [ 00 ] min
[ 00 ] wents to 30,29....
time increase
Display
[ 0 ]
The remaining time
[ 00 ] then stops
Display
[ 0 ] or [ H ]
Timer [ 00 ] min
[ 00 ] wents to 30, 29,
time increase