HQ Power VDLMM3N Mode D'emploi page 4

1 mirror ball motor
2 axle
3 chain link
4 lifting chain
5 installation eyelet
6 mirror ball
7 attachment eyelet
8 safety chain
9 attachment eyelet
Electrical Connection
cable
brown
blue
yellow/green
6. Installation
 Have the device installed by a qualified person, respecting EN 60598-2-
17 and all other applicable norms.
 The carrying construction must be able to support 10 times the weight
of the device for 1 hour without deforming.
 Never stand directly below the device when it is being mounted,
removed or serviced. Have a qualified technician check the device once
a year and once before you bring it into service. Only install and service
the system when area under the system is blocked.
 Install the device in a location with few passers-by that is inaccessible
to unauthorised persons.
 Overhead mounting requires extensive experience: calculating workload
limits, determining the installation material to be used... Have the
material and the device itself checked regularly. Do not attempt to
install the device yourself if you lack these qualifications as improper
installation may result in injuries.
 Only use the appropriate screws and pegs and make sure that the
screws are properly connected to the installation area.
 Mount the motor directly onto the mounting surface.
V. 02 – 22/06/2015
VDLMM3N
pin code
live L
neutral N
earth
4 ©Velleman nv