D-Link PowerLine AV 500 Wireless N Mini Guide D'installation page 5

First-time Configuration
1. Use your web browser to go to:
Windows: http://dlinkapWXYZ or http://dlinkap
Mac OS: http://dlinkapWXYZ.local. or http://dlinkap.local.
Where WXYZ is the last 4 digits of the MAC address. The full address is available
on the included Wireless Configuration Card.
2. Select ADMIN for the User Name and leave the Password blank.
3. From the landing page, start the Setup Wizard for PowerLine Connection.
4. When prompted, press the Common Connect Button for 2 seconds on your
existing device to connect it to the DHP-W310AV.
Note: If you have not previously secured your existing PowerLine network, you
will need to set up security for all of your existing PowerLine devices. Perform
the following steps for each device: press the Common Connect Button on
the DHP-W310AV, then press the Simple Connect Button on your existing
PowerLine device within 2 minutes.
5. Follow the wizard's steps to set up your PowerLine network. For more detailed
support, please refer to the User Manual.
DHP-W310AV
3