Publicité
Les langues disponibles
Les langues disponibles
INSTALLING THE BLADES
Blade
support
plate
10
| hinkley.com
Fasten blade to motor with provided blade support plates and
screws. Repeat procedure for remaining blades. Make sure
screws are TIGHT! Loose motor screws can contribute to
unnecessary hum during operation.
Blades
Screws
NOTE:
Cordless power screwdrivers are
NOT
as they usually strip the heads of the screws and
usually will not fully compress the lock washers on
the motor screws. Use a large flat blade screwdriver
for final tightening to fully compress the washers. This
will help ensure proper alignment of the blades and
noise-free, wobble-free running.
recommended,
Publicité
