Ameriwood HOME 3663342COM Mode D'emploi page 3

Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
Press CAM BOLT into hole.
3
Press parts together so CAM BOLT inserts
into edge hole.
ameriwoodhome.com
Before You Start
P
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
P
Parts are labeled on the surface or edge of the part
P
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
P
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
P
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
2
End hole
Press CAM LOCK into hole.
4
Using a screwdriver, turn the CAM LOCK clockwise to
lock the CAM LOCK and CAM BOLT into their holes
and fastening parts together.
3
Arrow to point towards end
hole in edge of part.