NIBBI NTR 270V Utilisation Et Entretien page 91

6. Adjusting the axle shafts and
brakes unlocking side levers
cAutIon
• Make sure to tighten the side
levers assembly screws properly.
• If the machine does not turn in a
proper way when the unlocking le-
ver (A) is pressed, adjust it by using
adjuster (B).
7. Adjusting the parking brake
cAutIon
o Adjust the brake in order to
keep it efficient and so that is
does not create resistance when
not necessary.
8. nuts and bolts that have to be
fixed on
Engine assembly bolts (A)
Sprocket assembly bolts
regularly check and tighten other
nuts and bolts.
AIRBORNE NOISE:
EC Certificate of Conformity
HANDLEBAR VIBRATION:
Statistically weighed measurement
in accordance with EN 1033: 11.5
m/s2.
Data refers to maximum value re-
corded with the range of engines
available.
29