Aiwa MF 150 Mode D'emploi page 20

Identifying the Codes you
found using the Search
Procedure
Once you have Set-Up your MF-150, you can blink back your
Set-up Code for future reference.
Example: to blink out your television code:
1.
2.
3.
4.
5.
6.
7.
- To blink back the code for your other devices, press the
appropriate device key during step 1.
Code Reference
TV
VCR
DVD
Press the TV key once.
Press and hold down SETUP until the red light
(LED under device key) blinks twice (the red light
will blink once then twice).
Press 9 9 0. The red light will blink twice.
For the first digit of your four-digit code, press 1
and count all the red blinks. If there are no blinks,
the digit is „0".
For the second digit of your four-digit code, press
2 and count all the red blinks. If there are no
blinks, the digit is „0".
For the third digit of your four-digit code, press 3
and count all the red blinks. If there are no blinks,
the digit is „0".
For the fourth digit of your four-digit code, press
4 and count all the red blinks. If there are no
blinks, the digit is „0". Now you have your
fourdigit code.
19