ambiance AMB05010 Instructions page 2

Specification
1. Display Temperature Range : O"C-40"C (in 0.1"C increments)
2. Adjustable Temperature Range :5"C-35"C (in 0.5"C increments)
3. Temperature measurement accuracy : ± 1 •c (at 20"C)
4. Power source : 2xAAA 1.5V LITHIUM BATTERY
5. Load Rating : 6(2)A, 230V
6. Low Battery indicator : Display
7. Standby current: 10 uA, Lighting current  5mA
8. Backlight color : Blue
9. Dimensions: 118 x 80 x 26 mm
Backlight
The backlight will be ON by press any button and OFF if no any press for 15 secs.
Running Mode
Switch by press in different mode:
HEAT (Heating) : adjust the temperature by press + or -
COOL (Cooling) : adjust the temperature by press + or -
OFF (Frost Protection) : it will start heating when the room temperature is under 7"C
Settings
1. HEAT SWING : Hold + and - under the "HEAT" mode for 3 secs to enter the Interface of
Swing setting (in 0.2-2); Press + or - to set the desired value, then press
2. COOL SWING : Hold +and- under the 'COOL" mode for 3 secs to enter the Interface of
Swing setting (in 0.2-2); Press + or - to set the desired value, then press
3. Calibrate the temperature: Hold + and – under the "OFF" mode for 3 secs to enter the
interface of temperature calibration "CAL' (in -3-+3); Press + or - to set the desired value,
then press to confirm.
Reset
Press RESET on the front case for 3 secs to restore the factory defaults
Instructions AMB05010 – English
when battery is less than 2. 7V
www.thermostat-ambiance.net
to confirm.
to confirm.