Publicité
Les langues disponibles
Les langues disponibles
solvents!
Note: After using up the flame, wait until the fireplace has cooled off completely.
•
Ensure that no more bio-ethanol is located in the fire compartment and no
•
bio-ethanol spills on parts of the product carelessly or in the surrounding area
before cleaning it.
Use a soft, slightly wetted cloth and if applicable, a small amount of mild cleaner to
•
clean the surfaces of the product and its accessories.
Use the warm water and a small amount of detergent to clean the fire
•
compartment regularly.
After cleaning, ensure that all parts are dry enough.
•
Fire hazard is caused of hot device parts! Always store it after the
If you want to store the product, make sure that the product and its accessories
•
have cooled off and bio-ethanol is used up completely.
The product should be stored in a clean, dry place.
•
Because the bio-ethanol is high flammability, the place of storage must be cool,
•
not exposed to direct sunlight, and away from intense heat sources or open
flames. You should not store it more than 5 Liters in your home.
Troubleshooting
Problem
The bio-ethanol
could not be lighted
up
In the case of fire
Storage
product to cool off completely.
Potential cause and solution
If the bio-ethanol in the fire compartment does not light up
after many times, it is possible due to a significant portion
of the alcohol having already evaporated thereby reducing
its ignitability. In this case, you'd better wait a few minutes,
dispose of the fire compartment's bio-ethanol, and then refill
the fire compartment.
Despite all safety precautions, If a fire breaks out, you could
use the alcohol-resistant foam or carbon dioxide as
extinguishing agents. It is necessary that you keep an
adequate extinguisher at hand close to the fire.
14
Publicité
