Télécharger Imprimer la page

Samsung DVE50M7450 Serie Mode D'emploi page 40

Masquer les pouces Voir aussi pour DVE50M7450 Serie:

Publicité

Les langues disponibles

Les langues disponibles

Troubleshooting
Problem
Items still wrinkled
after WRINKLE
PREVENT
(WRINKLE-CARE,
WRINKLE RELEASE).
Water drips from the
nozzle when STEAM
CARE starts.
Sprayed water is not
visible during STEAM
CARE.
Extended time.
If a problem persists, contact a local Samsung service center.
40
English
DV7450M-03170Z-00_EN.indd 40
Action
• Small loads of 1 to 4 items work best.
• Load fewer items. Load similar-type items.
• Take out the items immediately after drying is complete.
• This is steam condensation. The dripping water will stop after
a short time.
• Sprayed water is difficult to see when the door is closed.
• Sensor Dry automatically senses the moisture in the load
and shuts the dryer off when the selected dryness level is
reached.
The drying time can change according to the type and
amount of laundry. See the cycle chart for reference.
2017-01-25
11:24:24

Publicité

loading

Ce manuel est également adapté pour:

Dveg50m7450 serieDve50m7450pDve50m7450w