Vivotek AE-211 Mode D'emploi page 8

7.
Connect the Ethernet cable and the
12V DC connector to your camera. You
may use the BNC connector for initial
image adjustment.
AC Input
9.
Secure the housing to the bracket
using the supplied socket screws. Pan and
tilt the housing to aim at the monitored
area.
AC Input
AC Input
AC Input
RJ-45 Ethernet
RJ-45 Ethernet
8.
Connect 24V AC lines to the FTB.
1 connectors.
10.
Mount the bracket to a desired
position using the included mounting
screws.
8
BNC
BNC Connector
Connector
12V DC
12V AC Input
Input