Publicité
Les langues disponibles
Les langues disponibles
e screwdriver / Flat bladed screwdriver / Hexagonal spanner
unplugged and empty.
· Don't overload the cabinet.
must be saved to do the reinstallation of the door.
· Caution: please keep the products away from the fire or similar glowing substance before
you dispose the refrigerator.
flat as this may damage the coolant system.
· Caution : Not for outer camping use (ex. Tent)
at 2 people handle the unit during assembly.
· Caution: For indoor use only.
· Caution: The appliance can not be used in public transportation.
e the door swing reversed, we recommend that you contact a
· Do not freeze food again after it has been defrosted already.
t bladed screwdriver / Hexagonal spanner
n. You should only try to reverse the door yourself if you believe
· Do not place carbonated liquids such as fizzy drinks into the freezer.
ed to do so.
· Be careful when consuming ice lollies straight from the freezer to avoid freeze burns.
· Do not take anything out of the freezer with wet hands.
lips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
· The freezer produces sounds when the compressor pumps the refrigerant around. This is
do the reinstallation of the door.
unit is unplugged and empty.
normal.
moved must be saved to do the reinstallation of the door.
· Make sure that all food in the freezer is covered.
amage the coolant system.
the unit flat as this may damage the coolant system.
· Do not press together the food. The air should be able to circulate around the food.
e the unit during assembly.
mend that 2 people handle the unit during assembly.
· Do not leave the door open for too long. Also make sure that the door is always properly
t to have the door swing reversed, we recommend that you contact a
closed.
eversed, we recommend that you contact a
echnician. You should only try to reverse the door yourself if you believe
· Label the food with the date to be able to check the expiration in the freezer.
try to reverse the door yourself if you believe
e qualified to do so.
DOOR CONVERSION
1.
Remove the cover plate of the screws. Remove the three screws and then the upper
ge cover.
hinge that holds the door in place. Lift the door off and place it on a soft surface to
prevent scratching.
inge. Lift the
on a padded
m scratching.
upper hinge. Lift the
2.
On the bottom of the door there is a door stop and a Teflon bush to guide the hinge.
place it on a padded
Move this to the other side.
screw and plastic
nt it from scratching.
oor and move
r block, screw and plastic
upper door and move
de. You may
osite side. You may
r block to fit the
the door block to fit the
dle hinge by removing
www.domo-elektro.be
he lower door and place
45
Domo KC010
Publicité
