Publicité
Les langues disponibles
Les langues disponibles
WARNING:
WARNING:
Should any trouble occur, disconnect the AC power cord and refer servicing to a qualified technician.
Do not place anything directly on the top of the unit. Damage to the unit can result.
In case of malfunction due to electrostatic discharge the apparatus has to be reset by disconnecting it from mains
supply.
On Placement
Do not use the unit in places which are extremely hot, cold, dusty, or humid.
Place the unit on a flat and even surface.
Do not restrict the air flow of the unit by placing it in a place with poor air flow, by covering it with a cloth.
Do not place naked flame sources, such as lighted candles on the apparatus.
Do not place objects filled with liquids, such as vases, on the apparatus.
On AC Voltage
Before use, check that the rated voltage of your unit matches your local voltage.
On Safety
When connecting or disconnecting the AC cord, grip the plug and not the cord itself. Pulling the cord may damage
it and create a hazard.
When you are not going to use the unit for a long period of time, disconnect the AC power cord.
On Condensation
When left in a heated room where it is warm and damp, water droplets or condensation may form inside the
unit. When there is condensation inside the unit, the unit may not function normally. Let the unit stand for 1
to 2 hours before turning the power on, or gradually heat the room up and dry the unit before use.
ATTENTION SHOULD BE DRAWN TO THE EVIRONMENTAL ASPECTS OF BATTERY DISPOSAL.
THIS UNIT EMPLOYS A LASER.
ONLY A QUALIFIED SERVICE PERSONNEL SHOULD OPEN COVER IN ATTEMPT TO SERVICE THIS DEVICE
DUE TO POSSIBLE EYE INJURY.
CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CLASS 1 LASER PRODUCT
APPAREIL A LASER DE CLASSE 1
CLASS 1 LASER PRODUCT
PRODUCTO LASER DE CLASE 1
APPAREIL A LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
LASER SAFETY
INVISIBLE LASER RADIATION WHEN
OPEN AND INTERLOCKS DEFECTED.
The Lighting flash with an arrowhead symbol, within
the equilateral triangle, is intended to alert the user to
the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient
magnitude to cause an electric shock.
The exclamation point within the equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance(servicing) instructions
in this owner manual.
CAUTION
AVOID EXPOSURE TO BEAM
2
Publicité
