Télécharger Imprimer la page

Intenso TAB 1004 Mode D'emploi page 39

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 92
9.) WiFi
To connect your device with the internet, you require a WIFI connection. In order to establish this,
touch the WIFI icon on the starting screen, or open the WIFI setting within Settings.
Note: Please note that a wireless network must be located within the range of your current location.
Automatic connection
Open the WIFI settings via the WIFI icon or via Settings. Here you can quite simply activate or
deactivate the WIFI function. Simply slide the virtual key from its position "on" to the left to
deactivate the WIFI function. The display changes to "off".
To activate the deactivated WIFI function again, just slide the virtual key to the right.
On the right hand side of the WIFI settings, all available networks as well as all already used
networks are shown.
Tap on the desired network and, if required, enter the appropriate WiFi key (password) to establish
a connection.
Confirm the entered password, if necessary, by touching the enter key and then select Connect.
After a short while you are connected.
Notes
a)
If the device goes into standby mode, WiFi is turned off automatically. This reduces power consumption and thus automatically
leads to a longer battery life. When the device returns to active mode, the WiFi will automatically re-connect. This may take a few
seconds.
b)
The list of currently searchable WiFi networks will be updated automatically.
c)
If the WiFi function is enabled, the device automatically connects to an already configured network, provided it is within range.
d)
If an unknown wireless network is in range, an information box will appear.
Manual connection
In order to search for an accessible WiFi network manually, please proceed as follows:
(1) Open the settings.
(2) Now open the WiFi settings and tap `Scan´.
(3) Should the WiFi network not appear in the list of available networks then select the item `Add
network´ in order to enter the network SSID, the security protocol and the possibly related password.
Tap `Save´ to confirm your entries.
EN - 7

Publicité

loading