Inserting Armour39™ Module - Armour39 A39M01 Guide D'utilisation

INSERTING ARMOUR39™ MODULE
Inserting the Armour39™ Module into the Armour39™
Chest Strap:
20
1] Armour39™ Module orientation.
Verify that the Armour39™ Module
is "right side up" by checking that
tab is on the top of the Armour39™
Module and the two metal
connector pins are at the bottom of
the Armour39™ Module.
2] Insert Armour39™ Module into the
receptacle.
Place Armour39™ module into
the receptacle, located on the
Armour39™ Chest Strap, by
aligning the two metal connector
pins with the two small openings
on the bottom of the receptacle.
Place these pins into the openings,
and press firmly on the top of the
Armour39™ Module until it snaps
into place.