Flex FX5351 Manuel De L'utilisateur page 14

AUX OPERATING MODE: IN/OUT (FIG. 11)
Select the AUX operating mode using the
MODE button.
Remove the rubber cover from the AUX IN
connector and connect the external music
source (MP3 player or similar) using the
included AUX cable. Switch on the external
music source and start the playback.
Set the volume with the regulator for the
external music source or the volume knob of the
unit.
An external speaker or headphones can be
connected to the AUX OUT connector. Switch
on the unit and audio will be output to the
external speaker or headphones. You can also
briefly press the mute button
sound.
NOTE:
Batteries of the connected devices cannot be
–
charged via the AUX connection.
When the unit is switched off, the connected
–
devices are not switched off.
After using AUX or USB connectors, replace
–
the rubber covers to protect the connectors
against dust, dirt or moisture.
CHARGING EXTERNAL DEVICES VIA THE
USB PORT (FIG. 12)
Insert the USB plug of the device to be charged
into the USB port of the unit.
The USB power output port is a connection port
for powering low power devices such as cellular
phones, MP3 players, etc.
Immediately disconnect the USB device after
charging.
NOTE:
No music playback available via USB
–
connection.
After using the USB port, replace the rubber
–
cover to protect the port against dust, dirt or
moisture.
to mute the
-14-
Fig. 11
Fig. 12