Husqvarna PA310 Manuel D'utilisation page 2

Introduction............................................................... 2
Safety........................................................................4
Assembly.................................................................. 7
Operation.................................................................. 9
Product description
We have a policy of continuous product
development and therefore reserve the right
to modify the design and appearance of the
products without prior notice.
Intended use
WARNING:
may only be used together with
Attachment overview
7
10
12
1. Hand guard
2. Chain lubrication adjustment screw
3. Shaft
4. Harness support hook
5. Protective guard for saw chain
6. Bar nut
7. Chain tensioning screw
8. Saw chain
9. Guide bar
10.Chain oil tank
11.Chain oil tank cap
12.Operator's manual
2
Contents
Introduction
This attachment
8
15
13
Maintenance........................................................... 12
Technical data.........................................................17
Accessories.............................................................17
the intended product. See the
accessory chapter in the Operator's
Manual of the product.
This attachment is only designed for cutting
branches and twigs.
11
9
2
3
6
5
16
14
13.Transport guard
14.Combination wrench
15.Harness
16.Hex wrench
17.Bar/chain oil
18.Star wrench
Symbols on the attachment
Careless or incorrect use of this
product can result in serious or
fatal injury to the operator or
others.
4
18
17
2106 - 001 - 07.08.2023