Billow Technology XMINI Guide De L'utilisateur page 3

6. Do not block any ventilation openings. Install the equipment
according to the manufacturer's instructions.
7. Do not install near any heat sources such as radiators, heat
registers, stoves, or other devices (including amplifiers) that
produce heat.
8. Always power the device by the supplied 12VDC / 2.5A power
adapter
9. Protect the power cord from being pinched or pinched, especially
at the plug, and the point where it emerges from the equipment.
Make sure the power outlet is located near the equipment so that
it is easily accessible.
10. Use only accessories / accessories specified by the manufacturer.
11. Use only the media specified by the manufacturer, or sold with
the equipment. When used, use it with care to avoid damage.
12. Disconnect this equipment when it is not used for long periods
of time.
13. For problems with the device, contact the authorized technical
service.
Parts Description
1. ON / OFF button
2. Micro SD slot
3. Usb 3.0 Port
4. Usb 3.0 Port
5. Usb 2.0 port
6. DC connector
7. Usb 2.0 connector
8. Type C connector
9. HDMI input
10. Ethernet input
11. Audio Output / Microphone Input
12. Security hole
13. Type C connector (base)
14. Base lock button
15. Section HDD