Home Decorators Collection 489 395 Manuel D'instructions page 4

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
3 Nut (#1)
ASSEMBLY INSTRUCTIONS:
1. Shut off power at the fuse box or circuit breaker box, if necessary remove old
fixture and all mounting hardware from outlet box.
2. Carefully unpack your new fixture and lay out all the parts on a clear area, Take
care not to lose any small parts necessary for installation.
3. Install light bulbs in accordance with the fixtures specifications. (DO NOT
EXCEED THE MAXIMUM WATTAGE RATING!!)
4. Place the Glass shade (#7) up to the Fixture frame (#4) and secure with 3 pieces of
Nut (#1).
5. Screwing the Finial (#2) to the bottom of Glass shade (#7).
Page 4
1 Finial (#2) 2 Lock Nuts (#3)