Publicité
Les langues disponibles
Les langues disponibles
WIRELESS HEADSET «VINYLE»
CHARACTERISTICS
•
Foldable headset with adjustable headband
•
Handsfree kit with integrated microphone
•
Autonomy: 9h (call) / 6h (music)
•
Charging time: 2h
•
Maximum radio frequency: 2 dBM
•
Frequency range: 2,4 GHz - 2,4835 GHz
PACKAGING CONTENT
•
Wireless headset «Vinyle»
•
A micro USB / USB charging cable
WARNING & SAFETY INSTRUCTIONS
Safety instructions
This manual allows you to familiarize yourself with the operation of the product. Keep it so you can consult if necessary.
•
To prevent the risk of fire or electric shock, do not expose the headset to direct sunlight or a humid place.
•
Never immerse the headset in water or any other liquid.
•
Handle the headset with care. A blow, shock, or fall, even from a small height, can damage it.
•
This product is not a toy. Keep it out of the reach of children. Keep an eye on children to make sure they are not playing
with the device.
•
Do not attempt to disassemble or reassemble your headset.
•
Your device transmits and receives radio frequencies around 2.4 Ghz. These emissions can disrupt the operation of
many electronic devices. To avoid an accident, switch off your headset when you are in the following places:
- places where flammable gas is present, in a hospital, train, plane or petrol station,
- near automatic doors or fire alarms.
If you have a pacemaker or other prosthesis, ask your doctor for advice.
•
The receiver operates within a radius of about 10 meters. The communication range may vary depending on obstacles
(person, metal, wall, etc.) or the electromagnetic environment.
•
Do not use cleaning products containing alcohol, ammonia, benzene or abrasive substances.
•
If cleaning is necessary, use a soft cloth, moistening it with a reduced amount of water or water with mild soap if
necessary.
Attention: hearing security
•
To avoid hearing loss, do not use headset at high volume for too long and set the volume to a safe level. The higher the
volume, the shorter the secure listening time.
•
Listen at reasonable volumes for reasonable periods of time.
•
Be careful not to increase the volume as your hearing becomes accustomed to it.
•
Do not adjust the volume to such a level that it completely masks the surrounding sounds.
•
Use caution when using headphones or stop using in potentially hazardous situations.
•
Excessive sound pressure from earphones and headsets can cause hearing loss.
•
It is not recommended to drive with a headset covering both ears. This practice is even illegal in certain territories.
Battery recycling
This headset contains a battery that can explode or release dangerous chemicals. To reduce the risk of fire, never disassemble,
crush, or puncture the battery, or throw it into fire or water. Do not dispose of the headset with household waste, dispose of
the headset in a container suitable for recycling.
Ref: KO006412-KO006429-KO006436 - KO029022
•
Impedance: 32 Ohm
•
Bandwidth: 80 Hz - 20 kHz
•
Battery: 300 mAh
•
Transmission distance: 10m
•
Bluetooth: 5.0
•
Jack 3.5mm wired connection
•
A 3.5 mm jack cord
•
A user manual
2022/11V04/MKG
PRODUCT USE
HEADSET LOADING
- Before first use, charge the battery of this headset fully.
- To charge the headset, use the supplied USB / micro USB cable: connect the micro USB connector to the headset and the USB
connector to a USB mains charger or a computer. During charging, the headset indicator light turns red.
- When the charge is complete, the indicator light turns off automatically.
- When the battery is low, the headset beep and the LED flashes red.
CONNECTION TO A TELEPHONE VIA BLUETOOTH®
- To switch on the headset, press the button on the earpiece for 3 seconds, until the indicator light rapidly flashes red / blue.
- After a few seconds, an audible signal will sound and the indicator light will flash alternately in red and blue. This means that
the headset is in Bluetooth® pairing mode.
- On your phone or MP3 / MP4, activate the Bluetooth® device search function.
- When the search is finished, connect your device with the "KEYOUESTBT" device.
- An audible signal sounds and the indicator light turns blue.
- If the connection fails, turn off the headphones and try the operation again.
- To switch off the headset, press and hold the button for 4 seconds, until the indicator light turns red and then goes off.
- If no device is connected, the headset will turn off automatically after 3 minutes.
FUNCTIONS FOR MUSIC
- Increase the sound: press and hold the button
- Decrease the sound: press and hold the button
The maximum or minimum volume setting is signaled by a BEEP.
- Next track: briefly press the button +
- Previous track: briefly press the button -
MAKE OR TAKE A CALL
If the headset is connected to your smartphone, just follow the instructions on your smartphone to pick up, hang up or adjust
the volume.
HEADSET WITH WIRE LISTENING
It is possible to connect a device to the headset with the included 3.5 mm jack cable.
Warranty
Products are guarranteed against any failure from manufacturing defects.
This warranty does not cover normal wear or tear, or damage caused by improper use, keep your invoice stapled to the user manual.
SRDi declares that the product «Wireless headset Vinyle» is in compliance with the directives 2014/53/EU & 2011/65/EU.
The full EU Declaration of Conformity is available on our KeyOuest site at the following web address: www.keyouest.fr
+
-
Directive 2012 / 19 / EU
Correct disposal of this produt
Electronic waste should not be thrown away with
household waste. Please recycle them to your authorized
agency and check the recycling advice with the relevant
local authorities.
SRDi
85430 La Boissière des Landes FRANCE
Publicité
