Publicité
Les langues disponibles
Les langues disponibles
Operation
Control Panel
1
Model:
MAV180-A2804PS/01FM-US
1
Program selector
Select the appropriate program for the
type of loading.
2
Temp.
Select the washing water temperature.
The rinsing water temperature will
always keep in Cold. There is always
one option selected for temperature,
except when the selected programs
are Tub clean, Drain&Spin.
Hot - Hot water with no cold water
added.
Warm - Mixture of hot and cold water.
Cold - Cold water with no warm water
added.
Tab Cold - Automatically selects the
water temperature according to the
selected program.
8
2
3
4
5
6
3
Water level
Select the washing water level. The
rinsing water level is the same as the
washing water level. There is always
one option selected for water level,
except when the selected programs are
Tub clean, Drain&Spin.
High - Select for the large loading level.
Medium - Select for the medium loading
level.
Low - Select for the low loading level.
Auto - Automatically selects the
water level according to the loading
level.
Soil level
4
Select the soil level.Different soil level
settings.There is always one option selected
for Soil level,except when the selected
programs are Tub clean, Drain&Spin.
5
Options selector
Select one additional program before
the machine runs. If the selector is
adjusted while the program is running,
the position of the selector will take
effect after the program has finished
running.
17
Operation
Control Panel
Start/Pause button
6
Press once to start the program.
Press again to pause the program. You
can
add a garment. And only
Water Level could be changed.
Once again to restart the program.
Power
7
Press to turn on your washer. Press again
to turn off your washer. If you leave your
washer and do not press
within 10 minutes, your washer automatically
turns off.
7
8
Cycle status lights
The relative light will be lighted when
the washer is in its washing program,
as the soak will light when the washer
is operating in soak process.
The door can't be opened When the
lock light is on.
When the
it means the program will be quickly
finished than normal.
When the whole program is finished,
the light will flash 6 times.
Cycles and
button
light was be lighted,
18
Publicité
