RDL FLAT-PAK Serie Installation

FLAT-PAK SERIES
™
Model FP-PA20A
20 W Audio Power Amplifier
ANYWHERE YOU NEED...

20 Watts RMS Constant Voltage Amplifier

70 V and 100 V Outputs

Maximized Audio Level for Output Power

Audio Quality Superior to Standard Amplifiers

Input / Output Terminal Block Connections

Line Level Balanced or Unbalanced Input

Integral Audio Compressor to Control Clipping

High Overall Operating Audio Level

Peak LED to Indicate Audio Compression

Ultra-compact All Metal Construction

Convenience of RDL FLAT-PAKs
You Need The FP-PA20A!
The FP-PA20A is part of the group of versatile FLAT-PAK products from Radio Design Labs. The unique
FLAT-PAK case can be directly screwed or bolted to cabinets or shelves.
rack-mounting accessories permit single or multiple FLAT-PAK module mounting.
APPLICATION: The FP-PA20A is the ideal choice in many applications where multiple 70 V or 100 V
speakers in a zone need to be powered from a single audio power amplifier.
The FP-PA20A features a balanced line level input that may be connected unbalanced. A front panel gain
control is designed to be adjusted either manually or with a trimming screwdriver. The gain range will
accommodate standard unbalanced levels as well as professional balanced levels. Both a 70 V and
100 V amplified output are provided to drive corresponding speakers in a distributed sound system.
A red PEAK LED is provided to indicate the threshold of the integral compressor. Audio levels that could
cause the amplified output to clip are compressed according to two dynamic time constants. Normal audio
level signals remain unaffected by the compressor thereby preserving audio dynamics and preventing the
compressor from increasing feedback potential when the amplifier is used for paging. The compressor is
designed to remain aurally transparent while maintaining clean, unclipped amplified audio for input
overloads of up to 20 dB. In addition to the compressor, an active filter circuit prevents saturation of the
output transformer at low frequencies. The FP-PA20A produces average audio levels and audio clarity
normally expected of amplifiers delivering much higher output power.
The durable construction and low profile of the FP-PA20A allow mounting in a wide range of locations not
suited to a conventional style power amplifier. Power is provided to the module either through the barrier
block or through the DC power jack. For full RMS output power, a 24 VDC 2A power supply is required. A
1A supply is sufficient for normal program audio levels and content. Power supplies are sold separately.
Wherever a high quality constant voltage audio power amplifier is needed to provide reliability, compactness
and unsurpassed versatility, the FP-PA20A is the ideal choice. Use the FP-PA20A individually, or combine
it with other RDL products as part of a complete audio/video system.

RDL 659 N. 6
th

St. Prescott, AZ., USA 86301
 
(928) 443-9391 FAX (928) 443-9392
Optionally available

www.rdlnet.com