Bertolini BTR 450 Manuel D'utilisation Et D'entretien page 77

Do not attempt to load/unload the
machine onto/from a truck while
the transport box of the machine
contains a load.
Do not allow anyone to stand di-
rectly in front of the machine while
loading/unloading the machine
onto/from a truck.
Use the F1 gear to load and the R
gear to unload the machine. Also,
set the throttle lever to the "Low"
position, use engine braking, and
move the machine slowly.
When ascending or descending the
ramp, always center the machine
on the ramp.
When ascending or descending the
ramp, do not attempt to change the
direction in which the machine is
traveling or operate the side clutch
levers.
To ascend or descend the ramp,
establish the travel path in advance
and then move the machine at the
lowest speed.
The center of balance of the ma-
chine will change suddenly when
the machine passes over the seam
between the ramp and the truck
bed. Be prepared for this sudden
change.
When transporting the machine in a
truck or the like, secure the machine
with a sufficiently strong rope and
use blocking bars.
11