Procedure; Assembly Procedure; Inserting Batteries - Silca Air4 Home Mode D'emploi

Masquer les pouces Voir aussi pour Air4 Home:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38
Air4 Home-Air4 Home PRO
INITIAL INSTALLATION PROCEDURE
1. Open the device, insert the ba eries the correct way round and close the device by ghtening the screws
on the back. ( Fig. /Abb.1-2)
2. To start using Air4 Home, download the "Air4 Home" app for free from the Android Play Store™ or Apple
Store™, and follow the instruc ons to copy your remote controls.
COPYING PROCEDURE
1. Make sure the remote control ba eries are fully charged.
2. Use Easy Scan Plus to ensure the remote control is compa ble with Air4 Home or consult the list of com-
pa ble remote controls on the website www.silca.biz or by consul ng the list available through the app.
3. Start the downloaded App by selec ng the Air4 Home device and use the remote control COPYING

PROCEDURE.

4. The App will ask you to press the remote control key.
5. It is important to keep the right distance between the remote control and Air4 Home device (advisable
between 2 cm and 5 cm).
6. It is important that the original remote control is in the right posi on (Fig./Abb.10).
7. Start the downloaded App by selec ng the Air4 Home device and use the remote control COPYING
PROCEDURE.

ASSEMBLY PROCEDURE

8. MOUNTING TO THE WALL: Fix the bracket to the wall via the screws and wall plugs, and secure the device
in the bracket using the screw and nut. ( Fig./Abb.4-5 )
9. MOUNTING TO A POLE: Secure the device in the bracket using the screw and nut, insert the clamps into
the bracket, and a ach it to the pole. ( Fig./Abb. 4-5-6)
Please dispose of used ba eries in accordance with the local regula ons, and separately from household
waste. The device requires 2 x 1.5 V C-type alkaline ba eries (R14); these are pre-inserted in the device at the
me of purchase. Make sure that only new ba eries are used, every me that the ba eries are replaced. We
recommend using alkaline ba eries for a longer service life. The Air4 Home device has a rated voltage of 3.3
V and a power output of 0.3 W.
To replace the ba eries, proceed as follows (Fig./Abb.1):
1. Turn the device upside down, unscrew the 4 screws with a Phillips screwdriver and remove the ba ery
cover. (Fig./Abb.2)
2. Insert the new ba eries the right way around, so that the posi ve (+) and nega ve (-) ends are in the right
place, as indicated on the labels affi xed to the ba ery compartment. (Fig./Abb.1)
Only use and replace the old ba eries with ba eries that are a suitable size and type (alkaline, zinc-carbon
or zinc chloride).
IMPORTANT NOTE: There is a risk of explosion IF WRONG OR DAMAGED BATTERIES
ARE USED (e.g. if there is oxidation, liquid leaking or deformation).
12
8. PROCEDURE

9. INSERTING BATTERIES

Copyright Silca S.p.A 2019
English

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Air4 home pro

Table des Matières