Gastrodomus MF/900 Emploi Et Entretien page 53

2 - Turn the knob (M) until "08 CODE" appears on the display (A) "Defrost function").
3 - Press the button (G).
4 - Turn the knob (M) until the defrost time appears on the display (A).
Important
If "Defrosting" is required as one of the operating modes, it must always be set as
the first mode.
5 - Press the button (B) to select the microwave operating mode with the required power
level.
6 - Turn the knob (M) until the required processing time appears on the display (A).
7 - Press the button (C) to select the convection operating mode with the required tem-
perature.
8 - Turn the knob (M) until the required processing time appears on the display (A).
9 - Press the knob (M) to start the processing cycle.
"Safety lock" mode settings
1 - Press the button (H) and hold down for at least 3 seconds to start the function. The
appliance emits an acoustic signal and a light appears on the display to indicate that
all controls are disabled.
2 - To turn off the "Safety lock" mode, press the button (H) and hold down for at least 3
seconds. The appliance emits an acoustic signal and the light turns off on the display.
RECOMMENDATIONS FOR USE
1 - Based on the operating mode (microwave, grill or combo mode) and processing
mode (defrost, cook, heat, etc.) suitable prepare food product and place it in an ap-
propriate container.
2 - Place the container in the processing chamber and close the door.
3 - Programming the required processing cycle (see "Operating modes").
When the timer indicates that set time has elapsed, wait several seconds before re-
moving the container.
If food product is not adequately processed, place the container in the chamber and
set a new processing time.
Caution - Precaution
To avoid burn hazards, place and remove food products with specific utensils.
- 19 -
MC/1400 MICROWAVE
OVEN
English language
GB