Xiaomi Redmi Note 7 Mode D'emploi page 5

Correctly dispose of this product. This marking indicates that this product should not be
disposed with other household wastes throughout the EU.
To prevent possible harm to the environment or human health from uncontrolled waste
disposal, recycle responsibly to promote the sustainable reuse of material resources.
To safely recycle your device, please use return and collection systems or contact the retailer where the
device was originally purchased.
For Environment Declaration, please refer to the link below: h p://www.mi.com/en/about/environment/
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.
To prevent possible hearing damage,do not listen at high volume levels for long periods.
For more important safety information, please refer to User Manual in the link below:
h p://www.mi.com/en/certification/
Important safety information
· Read all the safety information below before using your device.
· Using unauthorized cables, power adapters, or ba eries can cause fire, explosion, or pose other risks.
· Use only authorized accessories which are compatible with your device.
This device's operating temperature range is 0 °C~40 °C. Using this device in the environments outside of
this temperature range may damage the device.
· If your device is provided with a built-in ba ery, don't a empt to replace the ba ery yourself to avoid
damaging the ba ery or the device.
· Charge this device only with the included or authorized cable and power adapter. Using other adapters
may cause fire, electric shock, and damage the device and the adapter.
· A er charging is complete, disconnect the adapter from both the device and the power outlet. Do not
charge the device longer than 12 hours.
· The ba ery must be recycled or disposed of separately from household waste. Mishandling the ba ery
may cause fire or explosion. Dispose or recycle the device, its ba ery and accessories according to the
local regulations.
· Do not disassemble, hit, crush, or burn the ba ery. In case of deformation, stop using the ba ery
immediately.
- Do not short circuit the ba ery to avoid overheating, burns, or other personal injuries.
- Do not place the ba ery in the high-temperature environments.
Overheating may cause explosion.
- Do not disassemble, hit, or crush the ba ery to avoid ba ery leaks, overheating, or explosion.
- Do not burn the ba ery to avoid fire or explosion.
- In case of deformation, stop using the ba ery immediately.
· Keep your device dry.
· Do not try to repair the device yourself. If any part of the device does not work properly, contact Mi customer
support or bring your device to an authorized repair center.
· Connect other devices according to their instruction manuals. Do not connect incompatible devices to this
device.
· For AC/DC adapters, the socket-outlet shall be installed near the equipment and shall be easily accessible.
03