Publicité
Les langues disponibles
Les langues disponibles
04 Initial Setup
The initial setup dialogue box appears when the TV is first activated. Follow the on-screen instructions to finish
the initial setup process. You can manually perform this process at a later time in the
Start Setup menu.
• If you connect any device to HDMI1 before starting the installation, the Channel Source will be changed to Set-
top box automatically.
• If you do not want to select Set-top box, please select Aerial.
Using the TV Controller
You can turn on the TV with the TV Controller button at the bottom of the TV, and then use the Control Menu. The
Control menu appears when the TV Controller is pressed while the TV is On. For more information about its usage,
refer to the figure below.
>
Settings > General >
Control menu
: Power off
: Volume Up
: Channel Up
: Volume Down
: Channel Down
: Source
TV Controller / Remote control sensor
Press: Move
Press & Hold: Select
The TV Controller is placed at the bottom
of the TV.
English - 13
Publicité
